Automatic Control Biomass Pellet Steam Generator

The main characteristic of the biomass particles in the steam generator efficiency, energy-saving environmental protection, save money, stability is high, easy to control widely used, from supervision and inspection, heavy new energy, bin, feed safety, combustion, multiple protection, automatic control, water cycle heat absorption device, easy operation, etc. ‌

High efficiency: scientific boiling space, ‌3 seconds to produce steam, thermal efficiency can reach more than 95%. ‌

Energy saving: scientific design, high thermal energy, than the traditional boiler more energy saving, energy saving 30%. ‌

Environmental protection: exhaust combustion type, low noise, power supply energy saving. ‌

Save money: uses clean energy biomass molding fuel, low cost, from a wide range of sources. ‌

Easy to control: easy to use, one key switch, produce a lot of continuous steam in a short time. ‌

High stability: microcomputer control over temperature, ignition, water supply, gas supply, is very stable. ‌

Widely used: suitable for many occasions. ‌

Free from supervision and annual inspection: sales, installation, use are free from supervision and annual inspection, operators do not need professional qualification requirements. ‌

New energy: biomass pellets as fuel, wide sources, low cost. ‌

Large bin: can be burned for several hours at a time. ‌

Feeding safety: adopts sealed rotary feeding, feeding uniform, will not be blocked. ‌

Full combustion: positive and negative pressure balanced combustion, full combustion, efficiency is higher. ‌

Multiple protection: with safety valve, overpressure, water level, overheating, dry burning and other multiple protection. ‌

Automatic control: microcomputer automatic controller, water, feeding, combustion interface visualization. ‌

Inlet circulation heat absorption device: cold water flow can fully absorb flue heat into hot water in the injection furnace, to increase evaporation efficiency. ‌

Easy operation: one-button start and stop, the rest of the automatic visual operation. ‌

These characteristics make the biomass pellet steam generator has significant advantages in energy efficiency, economy, environmental friendliness and convenience of use.

When using a biomass pellet steam generator, the following key things need to be noted to ensure safety and efficiency: ‌

Safe installation and maintenance: biomass pellet burners should be installed indoors or outdoors on a sturdy structure and away from combustible materials and explosive substances. All parts should be inspected regularly, to ensure that they are in good condition, should be replaced in time if damaged or defective. When transporting or moving burners, ensure that all components have been removed and properly packed to avoid damage during transportation. ‌

Fuel quality: dry, pure biomass pellet fuel should be used, to avoid impurities into the combustion system, this helps to improve combustion efficiency and reduce the risk of equipment damage. ‌

Water quality requirements: The use of clean, softened water, to avoid impurities in the water to form scale in the generator, affect the heat transfer efficiency and equipment life. ‌

Pressure and water level monitoring: pay close attention to the steam pressure, shall not exceed the rated pressure of the equipment, to prevent safety hazards. At the same time, keep the water level within the normal range, to prevent dry burning damage to the equipment caused by too low water level, water level should not be too high, to avoid steam water. ‌

Regular blowdown: regularly remove the dirt and sediment in the generator, to keep the equipment in good working condition. ‌

Operating specifications: The operator should be familiar with the operating procedures of the equipment, in strict accordance with the operating process, is not allowed to change the operating parameters. Understand and master the handling methods in emergency, such as equipment failure, abnormal pressure rise, abnormal water level, equipped with necessary fire fighting and emergency rescue equipment. ‌

Shutdown maintenance: after the shutdown should be a comprehensive inspection and maintenance, to prepare for the next use. ‌

Ventilation requirements: equipment installation site should be maintained good ventilation, to prevent the accumulation of harmful gases generated by fuel combustion. ‌

By following the above precautions, can ensure the safe, efficient operation of the biomass pellet steam generator, at the same time extend the service life of the equipment.‌

Packing:

LCL shipping: Packing in export plywood wooden case

FCL shipping: can choose not be packed in wooden cases(save your cost), directly wrapped film packaging into the container reinforcement.

Service & Installation:

Consultation service before, during, and after sales;

Project planning and design services;

Test the machine as far as possible in the existing conditions of the workshop until everything is functional;

Training of equipment maintenance and operating personally;

We supply installation drawing and instruction.

Warranty period: Main body one year, lifetime maintenance.

Easy damaged parts (gasket\plastic parts\rubber parts) free in 1 years, we supply the new one if there is quality problem caused fittings broken, freight is collect.

Installation and debugging:

Method(1): We will debug it well before shipping and take videos, supply remote assistant to install and debug when you do this job.

Method(2): If the buyer needs the supplier to send engineers to the site for installation and commissioning, extra charge.

T/T, L/C etc.